PRE-ORDER NanoPC T4 – assembled and synced, Ubuntu w/ Ethereum, IPFS, Status, Swarm

400.00 (350 DAI)

This NanoPC is a plug and play Ethereum node. Just plug it in and it begins syncing. It’s ready to work almost immediately.

Out of stock

Category: Tags: ,

Description

[NOTE] This is a PRE ORDER item because of a geth bug. These items will ship again starting April 1st because that’s how long it’ll take to re-sync.

NanoPC-T4, assembled and ready to be plugged in. Geth and Parity come pre-installed, as do IPFS, Status and Swarm, all up to date. The Ethereum node will be fully synced and ready to use (depending on how long the device takes to reach you, you might need to wait a few hours for it to get back in sync with mainnet as it’s been offline in transit). Instructions for running IPFS, Status and Swarm available here. You will also be given dedicated links for activating each, those will clarify things even further.

Comes with:

  • Gigabyte M.2 NVMe 512GB SSD
  • Acrylic case and aluminum cooler
  • 16GB Kingston Micro SD card, class 10, with adapter
  • NanoPC T4 with two antennae and specs as described in table below
Hardware Spec
CPU: Rockchip RK3399. big.LITTLE,Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53
GPU: Mali-T864 GPU,supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
VPU 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
DDR3 RAM: Dual-Channel 4GB LPDDR3
Storage: 16GB eMMC 5.1 Flash
Network: Native Gigabit Ethernet
WiFi: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface
Antenna Interface: dual antenna interface
Audio input/output Port 3.5 mm audio jack / via HDMI,DVP Camera/MIPI-CSI (two camera interfaces),HDMI Type-A / LVDS / Parallel RGB-LCD / MIPI-DSI (four video output interfaces)
Bluetooth: Bluetooth 4.1,Wi-Fi and Bluetooth combo module, dual antenna interface
Microphone: onboard Microphone
LCD Interface: one eDP 1.3(4 lane,10.8Gbps), one 4-Lane MIPI-DSI
HDMI: HDMI 2.0a, supports 4K@60Hz,HDCP 1.4/2.2
GPIO: 1 X 3V/1.8V I2C, up to 2 x 3V UART, 1 X 3V SPI, 1 x SPDIF_TX, up to 8 x 3V GPIOs;
1 x 1.8V I2S, 3 x 1.8V GPIOs
Serial Debug Port: one Debug UART, 4 Pin 2.54mm header, 3V level, 1500000bps
LED: 1 x power LED and 1 x GPIO Controlled LED
RTC: 2 Pin 1.27/1.25mm RTC battery input connector
PCB Dimension: Ten Layer, 100 mm x 64 mm
Power: DC 12V/2A
Working temperature: -20℃ to 70℃