Description
[NOTE] This is a PRE ORDER item because of a geth bug. These items will ship again starting April 1st because that’s how long it’ll take to re-sync.
NanoPC-T4, assembled and ready to be plugged in. Geth and Parity come pre-installed, as do IPFS, Status and Swarm, all up to date. The Ethereum node will be fully synced and ready to use (depending on how long the device takes to reach you, you might need to wait a few hours for it to get back in sync with mainnet as it’s been offline in transit). Instructions for running IPFS, Status and Swarm available here. You will also be given dedicated links for activating each, those will clarify things even further.
Comes with:
- Gigabyte M.2 NVMe 512GB SSD
- Acrylic case and aluminum cooler
- 16GB Kingston Micro SD card, class 10, with adapter
- NanoPC T4 with two antennae and specs as described in table below
Hardware Spec | |
CPU: | Rockchip RK3399. big.LITTLE,Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53 |
GPU: | Mali-T864 GPU,supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC |
VPU | 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc |
DDR3 RAM: | Dual-Channel 4GB LPDDR3 |
Storage: | 16GB eMMC 5.1 Flash |
Network: | Native Gigabit Ethernet |
WiFi: | 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface |
Antenna Interface: | dual antenna interface |
Audio input/output Port | 3.5 mm audio jack / via HDMI,DVP Camera/MIPI-CSI (two camera interfaces),HDMI Type-A / LVDS / Parallel RGB-LCD / MIPI-DSI (four video output interfaces) |
Bluetooth: | Bluetooth 4.1,Wi-Fi and Bluetooth combo module, dual antenna interface |
Microphone: | onboard Microphone |
LCD Interface: | one eDP 1.3(4 lane,10.8Gbps), one 4-Lane MIPI-DSI |
HDMI: | HDMI 2.0a, supports 4K@60Hz,HDCP 1.4/2.2 |
GPIO: | 1 X 3V/1.8V I2C, up to 2 x 3V UART, 1 X 3V SPI, 1 x SPDIF_TX, up to 8 x 3V GPIOs; 1 x 1.8V I2S, 3 x 1.8V GPIOs |
Serial Debug Port: | one Debug UART, 4 Pin 2.54mm header, 3V level, 1500000bps |
LED: | 1 x power LED and 1 x GPIO Controlled LED |
RTC: | 2 Pin 1.27/1.25mm RTC battery input connector |
PCB Dimension: | Ten Layer, 100 mm x 64 mm |
Power: | DC 12V/2A |
Working temperature: | -20℃ to 70℃ |